10pcs New Opcom 2014V Can OBD2 For Opel Firmware V1.59
OPCOM 2014 diagnostic tool for Opel cars covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B. Opcom 2014 lets you read and clear fault codes, support many control units.
UKOBD2 Provide top quality 10pcs New Opcom 2014V Can OBD2 For Opel Firmware V1.59, if you need 10pcs New Opcom 2014V Can OBD2 For Opel Firmware V1.59, or have any questions about 10pcs New Opcom 2014V Can OBD2 For Opel Firmware V1.59, welcome to contact us.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools
images of 10pcs New Opcom 2014V Can OBD2 For Opel Firmware V1.59
10pcs Opcom OP-Com 2014 V Can OBD2 For Opel Firmware V1.59
Highlights:
1. Software Version: 2014
Hardware Version: 1.59
2. OP-COM - PC based Opel diagnostic
Hardware Version: 1.59
2. OP-COM - PC based Opel diagnostic
3. OP-COM is a PC based diagnostic program.
OPCOM 2014 Function:
1. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information
OPCOM 2014 Feature:
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
You can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
Package List:
1. OP COM Interface
2. USB Cable
3. Software and Drivers CD
Go to Buy: 10pcs New Opcom 2014V Can OBD2 For Opel Firmware V1.59
Tags: Opcom, OP-COM V2014 , Opcom with firware V1.59 , opcom opel , opcom 2014 , new opcom , latest op-com