FVDI2 ABRITES Commander For Mercedes Benz/Smart/Maybach(V5.11) Software USB Dongle

FVDI2 Mercedes Commander is a professional software for diagnostic of Mercedes-Benz vehicles. It allows you to perform complete diagnostics of all 1995-present Mercedes-Benz models. It provides some unique functions, which are not supported by any other diagnostic tool, such key programming, mileage correction.

UKOBD2 Provide top quality FVDI2 ABRITES Commander For Mercedes Benz/Smart/Maybach(V5.11) Software USB Dongle, if you need FVDI2 ABRITES Commander For Mercedes Benz/Smart/Maybach(V5.11) Software USB Dongle, or have any questions about FVDI2 ABRITES Commander For Mercedes Benz/Smart/Maybach(V5.11) Software USB Dongle, welcome to contact us.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools

images of FVDI2 ABRITES Commander For Mercedes Benz/Smart/Maybach(V5.11) Software USB Dongle

FVDI2 ABRITES Commander For mercedes Benz Smart Maybach(V5.11) Software USB Dongle

Top 5 Reasons to Get mercedes-Benz FVDI2:

1. Software Version: V5.11

2. Supported Languages: English/ Germany/ Spanish/ French/ Russian/ Italian/ Danish/ Czech/ Chinese/ Bulgarian.

3. Update: Before update, you need advise the FVDI2 ID first, we will check if the ID is in the update list which can be update by email, if not in the list, can not do it yourself. you need send back the multiplexer to us for updating. and you need pay for the shipping cost of it

4. Supports 7G transmission and ISM renew data base, renew data base

5. Supported System: Windows XP Only
Note: When use this 20 Digit Nissan Pin Code Calculator, you need connect the software dongle and FVDI2 host, and you must Close FVDI2 Software when use this calculator.

FVDI2 Commander Software Installation Video

More Techincal Support for FVDI2

FVDI2 Connection for Authorization:



When obtaining authorization, please operate according to the following steps strictly:
Step 1. Connect the Softdog to FVDI2. Do not connect Softdog to the computer, otherwise the green light of Softdog or red light will be on, and result in authorization failure.
Step 2. Use USB cable to connect FVDI2 and the computer, but do not connect FVDI 2 to the car. Wait until FVDI 2 green light flashing and Softdog red light on, then you will get authorization successfully. If FVDI 2 red light on or Softdog green/red flashing, it shows abnormal, please repeat the above steps to connect again.
After get authorization for FVDI2, follow the next steps to connect.
Step 1. Connect the Softdog to FVDI2 (Note: do not connect Softdog to the computer).
Step 2. Use USB cable to connect FVDI2 and the computer. Wait until FVDI 2 green light flash and Softdog red light on, then connect Softdog USB cable to the computer. During the procedure, the Softdog red light keeps on (Note: do not connect FVDI2 to the car)
Step 3. Till the above 2 steps work well, connect FVDI2 to the car.

FVDI2 mercedes Commander Standard Function:

1. Read identification
2. Read extended identification
3. Read/Clear fault codes
4. Scanning for control units / Clearing fault codes in all control units
5. Display of Actual Values
6. Actuator Tests
7. Reset of control units
8. Control unit adaptations
9. Adjustment of injector injection quantities adaptation for Diesel Engines (CDI-4, CDI-5)

FVDI2 Mercedes Commander Special Function:

1. By OBDII - Comprehensive Mileage Recalibration for W221 and W216 vehicles.
The mileage is changed in the following units: CGW, EZS, Instrument Cluster and all other units, which store the mileage
(like Tire Pressure Monitor and Adaptive Brake, for example) , Read/Write service history records in ZGW of W221 S-Class and W216 CL,
Read/Write complete EEPROM and Flash of CGW (Central gateway) of W221 S-Class and W216 CL, Mileage Recalibration in dashboard for Vito, Viano,
Sprinter after 2006 year
E-Class W211, CLS W219, GL X164, ML W164, R-Class W251, CLK W209, C-Class W203 and G-Class W463
A-Class W169, B-Class W245
2. By OBDII - Mileage Recalibration for W204/W212/X204/W197/W207 vehicles.
The mileage is changed in the following units: ASSYST, ASSYST Plus, EZS, Instrument Cluster
3. By OBDII - Read/Write EEPROM of Dashboard control units, ESP, Sensotronic Brake Control (SBC) and many others...
Online manual for Sensotronic Brake Control Repair
4. By OBDII - Airbag - Read/Write EEPROM, Clear Crash Data, Erase Motohours
5. Dump Tool - calculate mileage values, reset mileage values, clear airbag crash data, make engine control virgin and so on
6. By OBDII - ECU - Read/Write Flash, Read/Write EEPROM of Engine Control Units
7. DAS-2 - Generation of key dumps for vehicles with DAS-2 Immobilizer system.
8. DAS-2a - Programming transponder keys for DAS 2a Immobilizer system (W168 A-Class).
9. By OBDII - DAS-2b - Key Learning for Mercedes W163; Read/Write EEPROM of AAM/EAM control modules;
Learn radio code of transmitter keys; Deactivate/Reactivate keys
10. Transponder generation
11. By OBDII - TV/AUX activation/deactivation
12. By OBDII - Seatbelt warning activation/deactivation
13. By OBDII - Reverse warning activation/deactivation
14. By OBDII - Activation/deactivation of Speed warning for Gulf States
15. Electrical Steering Lock (ESL) - Read/Write/Unlock EEPROM of ESL for the following vehicles:
W202, W208, W209, W210, W203, W211, W219 by direct connection to the ESL module.
16. Electrical Ignition Switch (EIS, K-Line) - Read EEPROM of EIS and ESL modules by diagnostic connection to the EIS module; Open/Close ESL
17. Electrical Steering Lock (ESL, CAN) - Disable/Enable keys; Write VIN of new units; Activate/Deactivate ESL; Activate/Deactivate EZS
18. By OBDII - Change ASSYST PLUS Service maintenance records
19. By OBDII - Change ASSYST Service maintenance records
20. By OBDII - Read/Write COMPLETELY EEPROM of Central Gateway (CGW) via OBDII.
Works for the following vehicles : W211, W171, W219, W164, X164, W169, W245, W204, W212, X204, W218
21. By OBDII - SMART key teach-in (K-Line and CAN)
22. By OBDII - Renew of 7-Gear Electronic Transmission Control Unit (722.9) and ISM - Intelligent Selector Module

Technical specification:

1. K-line ISO 9141 (100 mA) multiplexed to 24 different pins of the diagnostic connector
2. ISO14230 compliant
3. Single wire CAN bus multiplexed to different pins of diagnostic connector
4. Dual wire low speed CAN bus multiplexed to different pins of diagnostic connector
5. Dual wire high speed CAN bus multiplexed to different pins of diagnostic connector
6. CAN bus GMLAN, ISO14229, ISO15765, J1939, ISO22901 compliant
7. USB interface to the PC
8. Supply voltage 8..30V DC
9. OBDII cable
10. Updatable firmware
11. ABRITES Commander for Mercedes/Smart/Maybach

Go to Buy: FVDI2 ABRITES Commander For Mercedes Benz/Smart/Maybach(V5.11) Software USB Dongle

Tags: fvdi2 abrites commander, mercedes benz smart maybach v6.4 commander , commander for mercedes benz
Prev: MST-9000+ Automobile Sensor Signal Simulation Tool MST-9000
Next: 2017 ICOM A2+B+C For BMW Diagnostic & Programming Tool Without Software