14 Pin Consult Interface For Nissan USB Car Diagnostic OBD Fault Code Cable Tool

It works on all Nissan cars that have the grey 14pin Consult connector (you'll usually find it near the fusebox) (This cars are usually build from year 1989 to 2000) . Models such as: 300ZX, Z32, Maxima, 240SX, S13, S14, Skyline, SR20DE, SR20DET, RB20, Altima, Fairlady.

UKOBD2 Provide top quality 14 Pin Consult Interface For Nissan USB Car Diagnostic OBD Fault Code Cable Tool, if you need 14 Pin Consult Interface For Nissan USB Car Diagnostic OBD Fault Code Cable Tool, or have any questions about 14 Pin Consult Interface For Nissan USB Car Diagnostic OBD Fault Code Cable Tool, welcome to contact us.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools

images of 14 Pin Consult Interface For Nissan USB Car Diagnostic OBD Fault Code Cable Tool

14 Pin Consult Interface For Nissan USB Car Diagnostic OBD Fault Code Cable Tool

1.Interface fitting for 14pin Consult Port of Nissan vehicles.
2.Heavy & robust casing for rough service use
3.Connects to PC via RS232
4.Powered from car battery over 14pin Consult Port of Nissan vehicles.
5.LED to control power and clock function

Functions:

1.Monitor and Log dozens of realtime parameters
2.Check and clear engine fault codes before going to an expensive auto shop
3.Adjust the timing and idle
4.Power balance testing
5.Reset the self-learn codes
6.Control idle air valves, relays (AC, fans, etc), timing
7.Diagnose customer vehicles on-site
8.Speed up troubleshooting of electronically monitored components
9.No software is supplied with this device

Specification:

1.Software include

(Note that some of it is not free and need to be purchased)
DDLreader: DDLreader v.15c / DDLreader v.16c
ConZult
ScanTechNissan
Z-Control
SRTalk v.1.0
ZCSetup v.2.0
ZTalk v.1.1
Nissan Data Scan v.1.4
Nissan Data Scan v.1.51

2.Workable Model

It works on all Nissan cars that have the grey 14pin Consult connector (you'll usually find it near the fusebox) (This cars are usually build from year 1989 to 2000) . Models such as: 300ZX, Z32, Maxima, 240SX, S13, S14, Skyline, SR20DE, SR20DET, RB20, Altima, Fairlady.

Go to Buy: 14 Pin Consult Interface For Nissan USB Car Diagnostic OBD Fault Code Cable Tool

Tags: Nissan Consult Interface, USB Car Diagnostic , OBD Fault Code Cable
Prev: LAUNCH X431 CRP909 All System Auto OBDII Diagnostic Scanner with 15 Special Functions
Next: GODIAG K104 TOYOTA Hand-held Key Programming Tool K104 Key Programmer