Description

【SAVE TIME &COST】: Dent repair kit can save a lot of money for you compared with the auto body shops, our paintless dent removal tools kit can help you repair your cars by yourself for many times. 【 INSPIRED DESIGN】 : Our slide hammer T bar puller tool uses a lever-type design for metal panel dent repair works, and can also be decomposed into two different T bar, clever use. 【Widely used】: The Slide Hammer T-Bar Tool is not only for car dent removal, but also can be used refrigerator, motorcycle body, washing machine and hail damage. 【Corresponding to different dents】: The Slide Hammer Tool can be repaired against a variety of dents, dent repair lifter can also be adjusted, according to the size of the dent can be adjusted. 【DURABLE】: They will don't hurt the auto surface, very sturdy and keep a long lifetime.

How to use？

1.Clean the dent with a clean wet cloth; 2.Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes; 3.Choice the proper drawing gasket,Large dent requires a large drawing gasket. 4.Pull the trigger and apply the drawing gasket with extruded glue. 5.Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 3-5 minutes. The cooling time should be less than 8 minutes and should be shorter slightly in winter); 6.While use this dent removel T Bar tools, pull the sliding rod backwards to pull up the dent; 7. Check with a Line board. If dent still exists, knock it slightly with a knockdown tool. 8.Use alcohol and plastic shovel to clean up the residual glue.