New Real HEX-V2 HEX V2 Dual K & CAN USB VAG Car Diagnostic interface
This HEX V2 is a genuine , real hex v2 interface with full functions, not need vcdaloder for all languages,only support English and Chinese version VCDS, it's the best only use the software in the CD.
UKOBD2 Provide top quality New Real HEX-V2 HEX V2 Dual K & CAN USB VAG Car Diagnostic interface, if you need New Real HEX-V2 HEX V2 Dual K & CAN USB VAG Car Diagnostic interface, or have any questions about New Real HEX-V2 HEX V2 Dual K & CAN USB VAG Car Diagnostic interface, welcome to contact us.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools
images of New Real HEX-V2 HEX V2 Dual K & CAN USB VAG Car Diagnostic interface
This new arrival HEX V2 is a real hex v2 interface with full functions, not need vcdaloder for all languages. it's the best only use the software in the CD, the lower version vcds may be not supported.
Note: This hex v2 interface does not support firmware update, if you need firmware update version, please choose SP5285-C.
What's the difference between SP5285-C and SP5285-E?
SP5285-C supports both firmware and software updated. SP5285-E is a new product from a new factory, currently it is only support software updated, the firmware currently is the latest version, but not support firmware updated.
SP5285-C: English and Chinese not need vcdsloader, the other languages vcds need to be used with vcdsloader.
SP5285-E: no vcdsloader, directly use vcds software, only support Chinese and English Version VCDS.
SP5285-C has been sold for a long time, all function are tested by customers, it's a reliable product.
SP5285-E is a new product, currently Chinese and English Version VCDS can work very well, if you need to use other version vcds, please buy SP5285-C.
HEX-V2 is a high-speed CAN transceiver that provides an interface between a controller area network (CAN) protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed (up to 5Mbit/s) CAN applications in the automotive industry, providing differential transmit and receive capability to (a microcontroller with) a CAN protocol controller. It offers improved electromagnetic compatibility (EMC) and electrostatic discharge (ESD) performance
Features
Fully ISO 11898-2,-5, SAE J2284 compliant
CAN FD ready
Communication speed up to 5Mbit/s
Low electromagnetic emission (EME) and high electromagnetic immunity (EMI)
Differential receiver with wide common mode range
Atmel ATA6560: Silent mode (receive only)
Remote wake-up capability via CAN bus
Functional behavior predictable under all supply conditions
Transceiver disengages from the bus when not powered up
RXD recessive clamping detection
High electrostatic discharge (ESD) handling capability on the bus pins
Bus pins protected against transients in automotive environments
Transmit data (TXD) dominant time-out function
Undervoltage detection on VCC and VIO pins
CANH/CANL short-circuit and overtemperature protected
Qualified according to AEC-Q100
Package Including:
1* hex v2 interface
1*USB CABLE
1*CD
Go to Buy: New Real HEX-V2 HEX V2 Dual K & CAN USB VAG Car Diagnostic interface